Surf Helmets - anyone wearing them and what brand?
https://www.facebook.com/Andy-Caps-Custom-Moulded-Surfing-Helmets-277954...
-------------------------------------------------------
Highly rate Andy Caps
Gnarly cut to the noggin, is there a thread on impact vests, the non inflatable version and do crew up size the wetty when them wearing underneath? Seen them under suit and over.
I have a Patagonia vest which has worked fine underneath Billabong and O'Neil steamers
Patagonia short johns are the best a lot of guys wear them in Hawaii and now I see them
out at big Ulu bombie wont save your but will definitely help prolong it. I wore mine over the
top of my steamer in the last giant swell very reassuring and comforting.
mozzie wrote:I have a Patagonia vest which has worked fine underneath Billabong and O'Neil steamers
Same. I've used the Pata vest under normal steamers without a problem.
On a sidenote: The best use for a Patagonia foam floatation vest is bodybashing, especially on big days.
Thank you crew will have a look, I have seen a few around but hadn't the chance to ask what works and what crew like. Didn't know if flotation would stretch out a wetty if that is even possible. Besides the float the extra layer may help with reef or rock scrapes/ impacts just like helmets. I like the look of the soft helmet's and practicality of it being able to pack down but the hard helmets may provide a harder impact rating? The old school gath is great but a bit disorienting around the ears to the point Ive been wondering if I can modify it so it's less noticeable to my hearing.(balance)
The head first thread covers helmets for anyone looking
Hey Dave, if you still have the Gath, it's possible to cut the rubber on the inside to make more space.
That's assuming the required space is around your ears and upper jaw.
If it isn't, and you've just got a big head, then ignore this suggestion.
And you can hit it with a coat of White paint to keep the Temp down.....
Has anyone managed to hook up with Andy Caps without being in WA? I've used a Gath before and not had a good time and plenty rave about them, but can't see myself passing through WA anytime soon.
Andy is in NSW. It was Dutsy who took moulds for him in WA but he unfortunately died recently. Check Andy's facebook page for his contact details. Great helmets but very warm, I'd take one to g-land but you'd cook your melon in warm tropical water
Andy lives northern rivers area near yamba if that's closer for you , you need to get head moulded in person for helmet construction 0409355837 Mr Andy Cap
udo wrote:
A friend living on lembongan use’s this type . His wife won’t allow him to go surfing unless he’s wearing one after a history of head injuries while surfing . He’s been knocked unconscious at lassos ( woke up on boat back to sanur ) knocked out at chopes ( got secondary drowning that night ) and opened up like a can of sardines at 12ft scar reef which was the final straw for the wife and enforced helmet for all surfs. He likes this type for better vision in the tube and some added jaw protection. Looks a bit like a power ranger but if that’s what it takes to go surfing , so be it.
What % of Surfers do you think wear one - Im thinking around 1% in Aust ?
I've seen a few of those gladiator helmets in real life, and apart from looking ridiculous I wonder if they're too big and will contribute to nasty neck twisting injuries. You don't wan't to break your neck trying to avoid a concussion.
Hi Gang
Being an older and wiser kook, I've taken a Gath helmet to Indo twice now. Didn't like the idea of being a 10 hour boat ride from the nearest hospital and I'm over looking cool. In fact, there was a guy on another boat who slammed his head into the reef on his first day and thankfully we had a doctor on our boat to look after him - he went home after one surf - the helmet would have saved him.
Loved the Gath helmet but they don't make one big enough for my boof head. "Pro" tip: Bought the carbon fibre coloured one but found it to be bloody hot in the tropics so my next one will likely be white.
Does anyone use another brand they can recommend?